Perfect for 32mm Coins and Medallions -- The H32 capsule works well with coins up to 1/8 inch thick. For coins not in the list below, check to make sure their diameter and thickness do not exceed the measurements shown below for Inside Diameter and Inside Depth respectively. To the extent the coin diameter is smaller than the Inside Diameter noted below this can allow for minor movement of the coin inside of the capsule.
Direct fit holders require a snug fit between the coin and the holder to keep the coin in place. Air-Tites exacting manufacturing process ensures that an Air-Tite will always fit the coin it was intended to hold. These holders have been designed to hold almost every type of US coin, medallion and bullion. This specific holder will accommodate coins with an outside diameter of 32.7mm and a thickness of 3.17mm.
Bulk packaged capsules do not have retail packaging resulting in less space and lower cost. Bulk boxes of 250 (pictured above) and pre-made smaller packs of 10, 20, 25, 50 or 100 capsules are packaged with the capsules between layers of foam. Capsules are shipped unassembled. We also have the H32 capsule available in retail blister packaging.
There are a variety of compatible "H" size storage and display products including:
- Storage boxes
- Presentation cases
- Album pages
The H27 Direct Fit Air-Tite Holder is recommended for:
 |
| Flowing Hair Half Dollar* (1794-1795) |
| Draped Bust Half Dollar* (1796-1807) |
| Capped Bust Half Dollar--Lettered Edge* (1807-1836) |
| 1 oz American Arts Medal (1980-1984) |
| 1 oz. Gold Eagle ($50) (1986-present) |
| 1 oz. Gold Buffalo $50 (2006-present) |
| 1 oz. Platinum Eagle ($100) (1997-present) |
| 1 oz Palladium Eagle ($25) (2017-present) |
|
| United States |
 |
| 1/2 oz. Silver Round* |
| 1/2 oz. Liberty Dollar |
|
| Private |
 |
| 1 oz. Lunar Gold Series 1 (1996-2007) |
| 1 oz. Gold Nugget |
| 1 oz. Gold Kangaroo |
|
| Australia |
 |
|
| China |
 |
|
| South Africa |
Inside Diameter: 1.287 inches (32.7mm)
Outside Diameter: 1.75 inches (44.45mm)
Inside Depth: 0.125 inches (3.17mm)
Outside Thickness: 0.213 inches (5.4mm)