Air-Tite Holder - Direct Fit - 34mm ($20 Gold) -- Blister Pack

Perfect for 34mm Coins and Medallions -- The H34 capsule works well with coins up to 1/8 inch thick.   For coins not in the list below, check to make sure their diameter and thickness do not exceed the measurements shown below for Inside Diameter and Inside Depth respectively.  To the extent the coin diameter is smaller than the Inside Diameter noted below this can allow for minor movement of the coin inside of the capsule.

Direct fit holders require a snug fit between the coin and the holder to keep the coin in place. Air-Tites exacting manufacturing process ensures that an Air-Tite will always fit the coin it was intended to hold. These holders have been designed to hold almost every type of US coin, medallion and bullion. This holder will accommodate coins with an outside diameter of 34mm and a thickness of 3.17mm. 

We also have the H39 capsule available in bulk orders which do not have retail packaging, resulting in less space usage and lower cost.

There are a variety of compatible "H" size storage and display products including:

• Storage boxes
• Presentation cases
• Album pages

The H34 Direct Fit Air-Tite Holder is recommended for:

	$20 Gold Liberty Head (1849-1907)    $20 Gold Saint Gaudens (1907-1933)
United States

Inside Diameter: 1.339 inches (34mm)
Outside Diameter: 1.75 inches (44.45mm)
Inside Depth: 0.125 inches (3.17mm)
Outside Thickness: 0.213 inches (5.4mm)