Novus Buffing Kit

The Novus Buffing Kit fits standard drills and is designed to polish plastics and acrylics such as slabs or Capital holders. Instruction come included on the back of the kit.

Kit Contains:

• 1 - Wool Applicator Pad
• 1 - Wool Buffing Pad
• 1 - Backplate Assembly
• 1 - Drill Adapter
• 1 - Microfiber Cloth

Buffing Kit Instructions:

1. Securely attach the red back plate and spindle assembly to the drill. Attach the white Applicator Pad to the red Micro Hook back plate.
2. Clean surface using NOVUS #1 Plastic Clean & Shine using a clean soft clotFor heavier scraches use NOVUS #3 Heavy Scratch Remover. Shake well and test in an inconspicuous area. Apply NOVUS #3 liberally to the surface being restored. Rub the white applicator pad in the polish before starting the machine. This technique keeps the polish on the surface resulting in a better finish and cleaner work area. Polish at right angles to the damage.
3. Continue polishing until only fine scraches remain. Using a clean cloth, remove all remaining Polish. THIS IS VERY IMPORTANT!
4. To prevent contamination, use yellow buffing pad to apply NOVUS #2 Polish. Apply NOVUS #2 liberally to the surface and polish in a circular motion uniformly to the entire surface. Polish using light pressure until NOVUS #2 dries to a light haze. Using a clean soft cloth, buff the entire surface clean.
5. For best results, follow with NOVUS #1 and buff with a clean soft cloth.
6. Clean buffing pads with hot water after use. Allow to dry.

POLISHING TIPS:

• Operate the buffer at a low speed to avoid overheating the plastic, approximately 1,000 RPM. Each polish should be applied with a separate clean bonnet.
• Before attempting to clean or remove scratches, always make sure the plastic is cool to the touch and not in direct sunlight. Use a liberal amount of NOVUS #1 to safely remove surface dust and dirt. Additionally, test scratch removers in a small inconspicuous area for compatability.
• Some plastics are coated with a thin film which may be damaged by the abrasive polish. NOVUS #2 & #3 Polishes are not recommended for use on coated plastics or eyeglass lenses.